20W Mini Hot Glue Gun

About this item:-

• Insert the glue stick into the gun through the inlet tube. Press trigger several times until the glue gun is firmly set into the inlet tube.
• Plug the Glue Gun’s cord into the electricity outlet. Flip the Power button switch to “ON” mode.
• Keep the glue gun aside and allow it to warm up for approximately 5 minutes.
• Gently squeeze the trigger of the gun until melted glue begins to emerge from the nozzle.
• No need to spread the glue. Apply glue to one of the two surfaces and press together within 15 seconds.
• Once the task is finished, switch off the Power button and unplug the Glue Gun.
• After switching off,it is recommended to put a sheet of paper under the nozzle, because the gun can drip residual glue. Please note: For best bonding, clean the surfaces to be glued.Use of clam and other holding devices is not necessary.Switch off the power button of Glue gun when it is not in use to control the flow of glue.The glue stick in use can’t be removed unless completely exhausted.
• Colour of the product is depend on Stock availabilty.